Whiteline
Whiteline | Engine Torque Arm Insert | GR Yaris
Whiteline | Engine Torque Arm Insert | GR Yaris
- Long-term order item (approx. 14-30 days shipping time)
You will receive €1,47 Guthaben when you purchase this item.
Couldn't load pickup availability
The Whiteline inserts reinforce the factory torque mount and reduce engine and transmission pitch during acceleration and gear changes. This provides a more direct feel during load transitions and can support more precise gear shifts. The inserts fill the voids in the existing rubber bushing; the original mount is retained.
Details
- Two polyurethane inserts for the factory torque mount
- Supplement to the existing mount, not a complete replacement mount
- Vehicle fitment: Toyota GR Yaris AWD and GR Corolla
- Part number: KDT985
Installation
Remove the torque mount and press the inserts fully into the intended voids of the stock bushing. Then, reinstall the mount using the original bolts. A damaged stock bushing should be replaced beforehand.
In the GR Yaris instructions, Whiteline specifies 60 Nm for the front bolts and 110 Nm for the large rear bolt. Observe the vehicle-specific workshop specifications and check all bolted connections after 200 km.
Note on noise and vibration
The stiffer mount can transfer additional engine noise and vibration into the interior. Whiteline explicitly points out a potential moderate increase.
Share
